The VRCL4SPH/V2 is the ideal external Dome for Budget External Installations where a Super High Resolution Colour Image is needed and good illumination is required at night. Installation and setup could not be easier with a full Multi Axis Ball Gimbal to adjust Pan / Tilt and Lens aspect Plus external easy screw adjustment of Varifocal Lens Focus and Angle. This Dome uses the Sony 540TVL Super HAD CCD and Processing with 36 IR LEDs and a CDS Sensor to switch on or off the LEDs. A Varifocal 4~9mm Auto Iris Day / Night Lens provides good area coverage and the Dome IP rating ensures that it is fully protected against rain when used externally. Key Features- Comprehensive Pan and Tilt adjustment.
- Multi Axis Gimbal for mounting at any angle.
- Sony High Resolution 540TVL CCD.
- 36 IR LED's for up to 20m illumination or more subject to reflective surfaces.
- Day / Night viewing.
- CDS Sensor to ensure the correct light level for IR LED switching.
- 4~9mm Varifocal Day / Night Lens.
- IP66 Weather Resistant rating.
- Die Cast Casing & Polycarbonate Cover.
- 12VDC.
| Full Specification |
|---|
| Model no. | VRCL4SPH/HR/V | | Image Sensor (CCD) | 1/3" Sony High Resolution Super HAD | | Scanning System | PAL | | Sync System | 2:1 internal | | Horizontal Resolution | 540 + TVL | | S/N Ratio | 48db + | | Gamma Correction | 0.45 | | Video Output Signal | 1.0vp-p, 75 ohms negative | | Minimum Illumination | 0.1 lux or 0.00 lux with IR LED's On | | AGC | Auto
| | BLC | Auto | | AES | Auto | | Lens | 4~9mm Varifocal Day / Night Lens.
| | Dimensions | Base Width - 140mm Height - 90mm | | Weight | 1kg | | Power Source | 12VDC | | Power Consumption | 1amp when LEDs operate - Normal 650mA | | Connection Cable Accessory | BNC + DC Only Integral 10m /20m /40m High Grade Integrated Video & Power Flexible Extension Cables |
|
