The VRCL2SPH/MR3.6 is the ideal external Dome for Budget External Installations where illumination is required and a discreet camera is needed. Installation and setup could not be easier with a full Multi Axis Ball Gimbal to adjust Pan / Tilt and Lens aspect. This Dome uses the Sony 420TVL Super HAD CCD and Processing with 14 Double Power IR LEDs and a CDS Sensor to switch on or off the LEDs. A Wide Angle 3.6mm lens provides good area coverage. Key Features- Comprehensive Pan and Tilt adjustment.
- Multi Axis Gimbal for mounting at any angle.
- Sony 420TVL CCD.
- 14 Double Power IR LED's for up to 10m illumination or more subject to reflective surfaces.
- Day / Night viewing.
- CDS Sensor to ensure the correct light level for IR LED switching
- 3.6mm Fixed Day / Night Lens.
- IP66 Weather Resistant rating
- Die Cast Casing & Polycarbonate Cover
- 12V DC Power
| Full Specification |
|---|
| Model no. | VRCL2SPH/MR3.6 | | Image Sensor (CCD) | 1/3" Sony Super HAD | | Scanning System | PAL | | Sync System | 2:1 internal | | Horizontal Resolution | 420 + TVL | | S/N Ratio | 48db + | | Gamma Correction | 0.45 | | Video Output Signal | 1.0vp-p, 75 ohms negative | | Minimum Illumination | 0.1 lux or 0.00 lux with IR LED's On | | AGC | Auto
| | BLC | Auto | | AES | Auto | | Lens | 3.6mm Fixed Day / Night Lens.
| | Dimensions | Base Width - 94mm Height - 70mm | | Weight | 0.32kg | | Power Source | 12V DC Regulated | | Power Consumption | 500~700mA when LEDs operate - Normal 200mA | | Connection Cable Accessory | BNC + DC Integral 10m /20m /40m High Grade Integrated Video & Power Flexible Extension Cables |
|
