Slim Video Transceiver. BNC Male ~ Terminal connectors for CAT 5 Cable. Simply plug in to the BNC input of Camera. Connect Terminals of CAT 5 cable and run Cable to another TTP111VE or TTP111VL or TTP414V 4 Input Hub. The Transceiver unit may then be connected to a Monitor, DVR or VCR. Very simple and efficient wiring method for colour up to 200m + and B/W up to 300m +.
Video Transceiver with Trailing BNC Connector Cable. Use this Transceiver when it is necessary to position equipment at a distance from the Camera Video Output. The Transceiver is IP65 rated and operates in the same way as the TTP111VT described above..
Multi Port Video Transceiver. Connect 4 Cameras (from Video Out) to the Female BNC Video Inputs of this Adaptor. Run CAT5 cable from the single RJ45 Adaptor or Terminal Strip Output to the RJ45 or Terminal Strip Input of another identical unit. The Video Signal may than be transmitted from the BNC Connectors of the 2nd Transceiver to a DVR / VCR or Multiple Monitors. As with the other Transceivers in this range this Adaptor may be used either as a Transmitter or Receiver. 
Multi Port Video Transceiver with 4 separate BNC and RJ45 Inputs / Outputs. Very useful when Multiple Receivers are being used at different location points. May be used with WC414 Accessories
Transmitter and Receiver Package (TTA111AVT and TTA111AVR). This Active Transmission Package includes Power Supply. Distance range may be adjusted with Dip Switches and there is also a Brightness Adjustment on the Receiver. System incorporates Audio and a Data or Alarm input.
Active Transmitter. 3 position Range Switch for Gain Selection and BNC or Terminal Connectors.
|
